Fliegl pfw 15.500 poly line + skate 150 cuba de purín

Geschwindigkeit: 60
________
Test our demonstration machine!;;Pump barrel wagon Fliegl PFW 15500 Poly Line;Demonstration machine, used;Year of manufacture 2022;approx. 450 loads in total;- in series;- tandem chassis;- permissible total weight 24,000 kg (corresponds to 20,000 kg axle load plus 4,000 kg support load) up to 40 km/h, axle distance over 1,800 mm, only possible in conjunction with steering axle, not possible with Titan and Gigant units, ball head required;- adjustable drawbar, bottom hitch;- K80 ball head (80 mm diameter);- hydraulic drawbar suspension including drop support foot (1 double-acting control unit required);- 2-circuit compressed air with ALB;- hydraulic axle shift (1 double-acting control unit required, not possible with hydraulic and air suspension);- pendulum unit Boogie SB (low center of gravity);- 2 Brake axles, front rigid, rear steered, hydraulically lockable, up to 60 km/h (1 single-acting control unit required);- Axle version 410 x 180 brake drum BPW;- 40 km/h version with EC type approval and COC papers (incl. fender, underrun protection and side marker lights);- Tires 750/60 spring center 900 mm, load capacity per wheel 6,740 kg at 40 km/h;- Container made of GRP;- Hydraulic sliding cover at the front, incl. position indicator (1 double-acting control unit required);- Wangen eccentric screw pump 6,000 L with stone trap;- 6" Perrot suction slide with quick coupler on the left;- Level indicator;- Porthole;- LED lighting 12 V with 7-pin plug;- Conical rotary slide, hydraulic (1 double-acting control unit required);- Hose storage (not required when installing a drag shoe/drag hose distributor);- Continuously strong hollow beam frame;- 2 baffles;- Universal joint shaft on one side, wide angle with overload protection, heavy-duty design;- Mounting brackets for drag shoe/four-point hydraulics;- Hydraulic shredding cutter for suction, screw pump and pump box and 1 control unit required. In combination with hydraulic pump shutdown, a 6-way control block is required;- Suction nozzle 8" with docking station, direction of travel to the right, including pump box (3 double-acting control units required; in conjunction with pneumatic pump switching, only 1 double-acting control unit required);- automatic hydraulic pump switching (when the maximum fill level is reached, the slides are switched to pumping mode), additional display on the control panel when the barrel is empty by means of optical (lamp) and acoustic signaling, hydraulic plate slide as suction slide, switch on the barrel for switching the slides, if the three-way slide is closed, this is displayed on the control panel. Control block and 2 control block sections required!;- Digital flow meter ISOBUS: shows m³/ha and m³/min., driving suggestion to reach the set m³/ha (tractor with ISOBUS and TECU according to AEF required);- 2 LED work lights;- 5-way control block with control panel: 5x13 l DW Load-Sensing;+;Fliegl trailing shoe distributor Skate 150;- in series;- Working width 15 m, hydraulically foldable;- Slurry distribution augers lower pan and auger winding made of stainless steel with external oil motor;- Outlet opening (bore) of the auger pan 21 mm (mainly for pig slurry);- Hose spacing 250 mm;- Collision protection left and right at the boom ends;- Leaf springs (exact outlet guide);- Screwed trailing shoe nozzle TWIN, division of the slurry jet at the outlet, doubling of the delivery belts, suitable for grassland and arable land (narrow slurry strip ensures less feed contamination), in conjunction with additional folding, two fewer TWIN nozzles are installed on the outer swivel joints, these are replaced by simple trailing shoe nozzles;- ISOBUS comfort control including control panel (control panel not required, in combination with Fliegl Slurry Tanker), load sensing, with sequential switching and change of direction of rotation of the augers;- Transport lock;- Storage box can be opened hydraulically, including 1-way control block;- Attachments for mounting on Fliegl poly-barrel, including console for connection to H-frame, bracket for transport lock and support on top of container, top link (required for poly-barrel);- Assembly costs (when completed with barrel);- Slider side shut-off hydraulic left, including control block;- Slider side shut-off hydraulic right, including control block;- Feeler wheels